P893

White adhesive printable PET film for low surface energy

  • Carrier: White polyester film
  • Adhesive: Solvent based acrylic
  • Liner: White anti-adhesive paper
En savoir plus
→ Dimensions
  • Various lengths and widths adapted according to needs
→ Uses
  • Labels applied on smooth and grained surfaces
  • Bonding on metallic or low surface energy
  • Can be applied on clean or greasy surfaces
→ Benefits
  • Excellent printability
  • Permanent adhesive - good adhesion on difficult surfaces
  • Excellent aging and UV resistance
  • Friction and scratch resistant prints if laminating
→ Storage and shelf life
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00171-01
Creation date : 2021/09/16

Check out other similar products

P402

Transparent glossy adhesive PVC film

  • Carrier: Transparent glossy calendered PVC film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 2 sided polyethylene coated paper
  • Product conformability, printability and excellent UV-resistance ensure a sustainable utilization outside the vehicle.
  • Excellent protection of friction, abrasion and scratch sensitive areas.
Technical sheet →

P892

White adhesive printable PET film for low surface energy

  • Carrier: White polyester film
  • Adhesive: Solvent based acrylic
  • Liner: White anti-adhesive paper
  • Bonding on smooth or slightly grained surfaces
  • Excellent printability
  • Good adhesion on low surface energy
  • High adhesiveness particularly suitable for difficult/greasy surfaces
Technical sheet →

P8921

White adhesive printable PET film for low surface energy

  • Carrier: White polyester film
  • Adhesive: Solvent based acrylic
  • Liner: White anti-adherent 2 sided polyethylene coated paper
  • High quality paper liner to increase cutting process
  • Bonding on smooth or slightly grained surfaces
  • Excellent printability
  • Good adhesion on low surface energy
  • High adhesiveness particularly suitable for difficult/greasy surfaces
Technical sheet →

P895

White adhesive printable PET film for low surface energy

  • Carrier: White polyester film
  • Adhesive: Solvent based acrylic
  • Liner: White anti-adhesive paper
  • Good adhesion on Low Surface Energy
  • Bonding on smooth surfaces
  • Excellent printability
  • High adhesiveness particularly suitable for difficult/greasy surfaces
Technical sheet →

P411

White PVC film for bonding on LSE

  • Carrier: White PVC film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 2 sided polyethylene coated paper
  • Special bonding on low surface energy as PP
  • Excellent printability
  • Excellent resistance to chemicals (fuel, brake fluid, ...)
Technical sheet →

Do you think this product could fit with your application? Get in touch with your Adhex correspondent now

Thanks to our experience and development skills, we develop solutions adapted to the needs of our customers and meeting all the requirements of the automotive industry.
Contact us →