X906

(Temporary) Blood Bag Label single coated PVC Film

Medical labels
  • Carrier: White PVC Film 110 g/sqm
  • Adhesive: Solvant acrylic adhesive 35 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
En savoir plus
→ Dimensions
  • Roll width upon request
  • Maximum width available 1540mm
  • Available in rolls, blank or printed labels
→ Uses
  • PVC Blood Bag primary label for identificationPVC Blood Bag primary label for identification
→ Benefits
  • Conformable
  • Printable facestock
  • Good resistance to plasticizer migration
  • High adhesion to PVC Blood Bags
  • Stable after steam sterilization (adhesive applied onto blood bag)
→ Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing
  • Product as supplied in original packaging will maintain stated properties during one year before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
  • Adhesion values and related specifications are set based on initial laband production trials. They should be regarded as provisional and might typically be adjusted after 5 first production runs will be performed. Given the physical/chemical characteristics and behavior of pressure sensitive adhesives, variation of physical values from one batch to another, or even within the same batch, are not unusual and cannotbe regarded as a defect. Where necessary, based on values observed in the 5 first batches, Adhex Lab will propose an adjustment of the specifications, including mean value, min/max limits and/or broadness of range.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00101-02
Creation date : 2021/10/14

Check out other similar products

Medical labels

X892-120

Blood Bag Label white PP film

  • Carrier: White PP film 115 g/sqm
  • Adhesive: Solvent acrylic 52 g/sqm
  • Liner: White paper one side siliconized 65 g/sqm
  • Thick PP adhesive carrier
  • Good printability
  • Stable after sterilization
  • High adhesion to PVC Blood Bag (DEHP, TOTM, DINCH)
Technical sheet →
Medical labels

X896

Blood Bag Label white synthetic paper

  • Carrier: White synthetic paper 90 g/sqm
  • Adhesive: Solvent acrylic 45 g/sqm
  • Liner: White paper one side siliconized 62 g/sqm
  • Highly conformable synthetic adhesive carrier
  • Printable
  • Stable after sterilization
  • High adhesion to PVC Blood Bag (DEHP, TOTM, DINCH)
Technical sheet →
Medical labels

X899

Blood Bag Label single coated PE film

  • Carrier: White PE film 108 g/sqm
  • Adhesive: Solvent acrylic 52 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
  • Highly conformable PE adhesive carrier
  • Excellent printability
  • Stable after sterilization
  • High adhesion to PVC Blood Bag (DEHP, TOTM, DINCH)
Technical sheet →

Do you think X906 could fit with your application ? Get in touch with your Adhex correspondent now.

Contact us →