P1297

Single coated transparent PU film

  • Carrier: Transparent PU film 50 g/sqm
  • Adhesive: Solvent free acrylic 30 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
En savoir plus
→ Dimensions
  • Roll width upon request
  • Maximum width 1250mm
  • Available with or without PE applicator
→ Uses
  • Adhesive tape for plasters
→ Benefits
  • Standard adhesion
  • Conformable and breathable
  • Waterproof
  • Printable
  • Bacteria proof
  • Easy handling without applicator
  • Suitable for children plaster manufacturing
→ Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during two years before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00016-02
Creation date : 2021/09/30

Check out other similar products

P1177

Single coated transparent PU film

  • Carrier: Transparent PU film 28 g/sqm
  • Adhesive: Solvent free acrylic 30 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
  • Very conformable and breathable
  • Waterproof and bacteria proof
  • Eco-friendly adhesive
Technical sheet →

P1197

Single coated transparent PU film

  • Carrier: Transparent PU film 28 g/sqm
  • Adhesive: Solvent free acrylic 30 g/sqm
  • Liner: White paper PE siliconized two sides 100 g/sqm
  • Good adhesion on skin
  • Eco-friendly adhesive
  • Easy to die-cut / convert thanks to liner thickness
Technical sheet →

P1298

Single coated transparent PU film

  • Carrier: Transparent PU film 50 g/sqm
  • Adhesive: Solvent free acrylic 40 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
  • Printable
  • Good skin adhesion
  • Easy handling without applicator
  • Suitable for children plaster manufacturing
Technical sheet →

Do you think P1297 could fit with your application ? Get in touch with your Adhex correspondent now.

Contact us →