FS3_FOE900-3_HBPP

Adhesive foam 900 door water shield

  • Carrier: Grey polyolefin foam
  • Adhesive: Elastomeric hot melt foamed adhesive bead
  • Liner: Brown non-stick paper
En savoir plus
→ Dimensions
  • Size, shape and adhesive coating of the part specifically adapted to the door and the design requirements (system environment)
→ Uses
  • The product is recommended for screen sealer / door water shield in the automotive market.
  • The part shape and the bead adhesive glue track is specially designed and adapted to avoid any risk of interfacing with door system parts (trim panel, wire harnesses, door sheet, speaker, etc)
→ Benefits
  • Sealed to water, air, dust and noise
  • Excellent acoustic insulation
  • Excellent adhesion on painted steel, aluminium and the PP parts
  • Good resistance to perforation
  • Self-extinguishing (fire retardant)
  • Technical option : Addition of acoustic patch or other solutions to improve the technical performance (vibration, anti-noise, anti-wear, etc..)
→ Storage and shelf life
  • 6 months from the date of production when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00163-01
Creation date : 2021/09/09

Check out other similar products

TS3_FOP100-2.2_HBPP

Adhesive foam 100 door water shield

  • Carrier: White polyolefin foam
  • Adhesive: Elastomeric hot melt foamed adhesive bead
  • Liner: Brown non-stick paper
  • Lightweight solution ideal for perfect water, air and dust tightness without high acoustic requirements
  • Bonding on painted sheet metal, plastic smooth or grained PP parts
Technical sheet →

TS3_FFP125-2_HBNP

Adhesive Flexfoam 125 for door water shield

  • Carrier: White complex polyolefin foam & PP film
  • Adhesive: Butyl adhesive bead
  • Liner: White non-stick paper
  • Lightweight solution ideal for perfect water, air and dust tightness without high acoustic requirements
  • Excellent resistance to perforation
Technical sheet →

FS2_FOP270-3_HBPP

Adhesive foam 270 door water shield

  • Carrier: White polyolefin foam
  • Adhesive: Elastomeric hot melt foamed adhesive bead
  • Liner: Brown anti-adherent paper
  • Lightweight solution ideal for perfect water, air and dust tightness without high acoustic requirements
  • Bonding on painted sheet metal, plastic smooth or grained PP parts
Technical sheet →

FS3_FOE270-3_HBPP

Adhesive foam 270 door water shield

  • Carrier: White polyolefin foam
  • Adhesive: Elastomeric hot melt foamed adhesive bead
  • Liner: Brown non-stick paper
  • Lightweight solution ideal for perfect water, air and dust tightness with a slight acoustic requirement
  • Bonding on painted sheet metal, plastic smooth or grained PP parts
Technical sheet →

FS3_FOP500-3_HBPP

Adhesive foam 500 door water shield

  • Substrate: White polyolefin foam
  • Adhesive: Elastomeric hot melt foamed adhesive bead
  • Liner: Brown non-stick paper
  • Good acoustic performance (insulating solution 500g/sqm)
  • Bonding on painted sheet metal, plastic smooth or grained PP parts
Technical sheet →

Do you think this product could fit with your application? Get in touch with your Adhex correspondent now.

Thanks to our experience and development skills, we develop solutions adapted to the needs of our customers and meeting all the requirements of the automotive industry.
Contact us →