P437

Gravel protection adhesive polyurethane film

Carrier: Clear aliphatic polyurethane film
Adhesive: Solvent based acrylics
Liner: Anti-adherent 2 sided polyethylene coated paper

→ Dimensions

Various lengths and widths adapted according to needs

→ Uses

Stone chip and gravel protection (door, wing, side-frame, front & rear bumper)
Anti-wear protection for the door seal
Shock-proof part for hood and trunk closure
Protection against scratches

→ Benefits

Scratch-resistance
High conformability / carrier material workability
Excellent adhesion (comply with the requirements of the automotive industry)
Excellent gravel-resistance
Chemical exposure resistance
Excellent UV-resistance and excellent resistance to wear

→ Storage and shelf life

6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.

Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com

Reference : FT-AUT-00089-03

Creation date : 2021/09/16

Discover other products of adhesive film for permanent protection of automotive paint

P4350

Scratch protection adhesive polyurethane film

Carrier: Clear aliphatic polyurethane film
Adhesive: Solvent based acrylics
Liner: White anti-adherent 2 sided polyethylene coated paper

Low thickness (150µm)
Perfect for protection against scratches, small gravel and light impact
Extremely conformable

Technical sheet →

P437RS

Gravel protection adhesive polyurethane film reinforced

Surface layer: Reinforced
Carrier: Clear aliphatic polyurethane film
Adhesive: Solvent based acrylics
Liner: Anti-adherent 2 sided polyethylene coated paper

Medium thickness (250µm)
Reinforced surface for better resistance
Stone chip protection, anti-scratch protection
Extremely transparent product

Technical sheet →

P437RSM

Gravel protection adhesive polyurethane film matt reinforced

Surface layer: Matt reinforced
Carrier: Clear aliphatic polyurethane film
Adhesive: Solvent based acrylic
Liner: Anti-adherent 2 sided polyethylene coated paper

Medium thickness (250µm)
Matt reinforced surface for better resistance
Specially adapted for the matt painted car
Stone chip protection, anti-scratch protection

Technical sheet →

P4371

Gravel protection adhesive polyurethane film with Bull'Net technology

Carrier: Clear aliphatic polyurethane film
Adhesive: Solvent based Acrylic (Bull’Net technology)
Liner: Anti-adherent 2 sided polyethylene coated paper

Medium thickness (250µm)
Stone chip protection, anti-scratch protection
Bull'Net system / anti air-bubbles system
Very conformable and transparent product

Technical sheet →

Do you think this product could fit with your application? Get in touch with your Adhex correspondent now

Thanks to our experience and development skills, we develop solutions adapted to the needs of our customers and meeting all the requirements of the automotive industry.