P4371

Gravel protection adhesive polyurethane film with Bull'Net technology

  • Carrier: Clear aliphatic polyurethane film
  • Adhesive: Solvent based Acrylic (Bull’Net technology)
  • Liner: Anti-adherent 2 sided polyethylene coated paper
En savoir plus
→ Dimensions
  • Various lengths and widths adapted according to needs
→ Uses
  • Stone chip and gravel protection (door, wing, side-frame, front & rear bumper)
  • Anti-wear protection for the door seal
  • Shock-proof part for hood and trunk closure
  • Protection against scratches
→ Benefits
  • Scratch-resistance
  • Limitation of air-bubbles technology
  • High conformability / carrier material workability
  • Excellent adhesion (comply with the requirements of the automotive industry)
  • Excellent gravel-resistance
  • Chemical exposure resistance
  • Excellent UV-resistance and excellent resistance to wear
→ Storage and shelf life
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00090-03
Creation date : 2021/09/16

Discover other products of adhesive film for permanent protection of automotive paint

P4350

Scratch protection adhesive polyurethane film

  • Carrier: Clear aliphatic polyurethane film
  • Adhesive: Solvent based acrylics
  • Liner: White anti-adherent 2 sided polyethylene coated paper
  • Low thickness (150µm)
  • Perfect for protection against scratches, small gravel and light impact
  • Extremely conformable
Technical sheet →

P437

Gravel protection adhesive polyurethane film

  • Carrier: Clear aliphatic polyurethane film
  • Adhesive: Solvent based acrylics
  • Liner: Anti-adherent 2 sided polyethylene coated paper
  • Medium thickness (250µm)
  • Stone chip protection, anti-scratch protection
  • Very conformable and transparent product
Technical sheet →

P437RS

Gravel protection adhesive polyurethane film reinforced

  • Surface layer: Reinforced
  • Carrier: Clear aliphatic polyurethane film
  • Adhesive: Solvent based acrylics
  • Liner: Anti-adherent 2 sided polyethylene coated paper
  • Medium thickness (250µm)
  • Reinforced surface for better resistance
  • Stone chip protection, anti-scratch protection
  • Extremely transparent product
Technical sheet →

P437RSM

Gravel protection adhesive polyurethane film matt reinforced

  • Surface layer: Matt reinforced
  • Carrier: Clear aliphatic polyurethane film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 2 sided polyethylene coated paper
  • Medium thickness (250µm)
  • Matt reinforced surface for better resistance
  • Specially adapted for the matt painted car
  • Stone chip protection, anti-scratch protection
Technical sheet →

Technical sheet →

Technical sheet →

Do you think this product could fit with your application? Get in touch with your Adhex correspondent now.

Thanks to our experience and development skills, we develop solutions adapted to the needs of our customers and meeting all the requirements of the automotive industry.
Contact us →