P228

Black adhesive felt

  • Carrier: Black Polyester felt
  • Adhesive: Acrylic hot melt
  • Liner: Brown kraft paper
En savoir plus
→ Dimensions
  • Various lengths and width adapted according to needs
→ Usages
  • Protection of plastic or steel parts subject to damages during the use of the vehicle or the phases of assembly and disassembly.
  • The P228 can be also used for acoustic purposes with electric harnesses.
→ Bénéfices
  • Resistant and conformable product
  • Adapted to difficult or greasy surface
  • Strong and quick bonding
  • Good performance in high temperature: 125°C peak
  • Excellent resistance to aging
  • Improve acoustic performances on protected parts
  • Easy to apply on deformed surface or by edgefolding
  • Good resistance to abrasion
  • Flammability - B type
→ Stockage et durée de conservation
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00071-03
Creation date : 2021/11/24

Découvrez d'autres produits de la gamme

P409

Black textured adhesive acoustic PVC film

  • Carrier: Black textured PVC film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 1 sided polyethylene coated paper
  • Thick (860µm), acoustic insulation and very resistant product of a very easy use
Fiche technique →

P724

Anthracite adhesive polyethylene foam 2mm

  • Carrier: Anthracite polyethylene foam
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 1 sided polyethylene coated paper
Fiche technique →

P1009

Grey adhesive PP Non-woven

  • Carrier: Grey PP non-woven
  • Adhesive: Water based acrylic
  • Liner: Brown non-adherent polyethylene coated paper
  • Excellent adhesion on low surface energy
  • Very good resistant against friction and scratch
  • Limits a friction noise
  • Printable
Fiche technique →

Ce produit convient-il à votre application ? Prenez contact avec votre correspondant Adhex dès maintenant

Grâce à notre expérience et à nos compétences en matière de développement, nous élaborons des solutions adaptées aux besoins de nos clients en répondant à toutes les exigences de l'industrie automobile.
Contactez-nous →