P409

Black textured adhesive acoustic PVC film

  • Carrier: Black textured PVC film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 1 sided polyethylene coated paper
En savoir plus
Dimensions
  • Various lengths and widths adapted according to needs
Usages
  • Black soft adhesive film elaborated for exterior and interior automotive hole covering , acoustic sealing and protection parts
  • Air/water/dust proofing
Bénéfices
  • Printable by high frequency
  • Product workability
  • Excellent acoustic properties
  • Excellent dimensional stability
  • Good chemical resistance
  • Good water resistance
  • Good scratch resistance
Stockage et durée de conservation
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00084-03
Creation date : 2021/09/15

Découvrez d'autres produits de la gamme

P228

Black adhesive felt

  • Carrier: Black Polyester felt
  • Adhesive: Acrylic hot melt
  • Liner: Brown kraft paper
  • Compatible with low energy surfaces or greasy surfaces
  • Reducing noises such as friction, vibrations or shocks between components inside the vehicle

P408

Black textured adhesive PVC film

  • Carrier: Black textured PVC film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 1 sided polyethylene coated paper
  • Thick (370µm) and resistant product of a very easy use

P421

Black adhesive PVC film high temperature

  • Carrier: Black fine textured PVC film
  • Adhesive: Solvent based acrylic
  • Protective liner: White non-stick paper
  • Thin (170µm) and compatible with an application on or under paint

P423

Adhesive PET foil

  • Carrier: Transparent PET foil (75µm)
  • Adhesive: Solvent based acrylic
  • Liner: White non-stick paper
  • Application on cataphoresis under paint or directly on painted subtract
  • Compatible with paints and varnishes applied at high temperature

P622

Adhesive aluminum foil

  • Surface layer: PET film
  • Carrier: Smooth annealed aluminum foil (38µm)
  • Adhesive: Solvent based acrylic
  • Liner: White non-stick paper
  • Application on cataphoresis under paint
  • Compatible with paints and varnishes applied at high temperature
  • Conducts electricity, e.g. for antenna conductors

P724

Anthracite adhesive polyethylene foam 2mm

  • Carrier: Anthracite polyethylene foam
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 1 sided polyethylene coated paper

P1009

Grey adhesive PP Non-woven

  • Carrier: Grey PP non-woven
  • Adhesive: Water based acrylic
  • Liner: Brown non-adherent polyethylene coated paper
  • Excellent adhesion on low surface energy
  • Very good resistant against friction and scratch
  • Limits a friction noise
  • Printable

Ce produit convient-il à votre application ? Prenez contact avec votre correspondant Adhex dès maintenant

Grâce à notre expérience et à nos compétences en matière de développement, nous élaborons des solutions adaptées aux besoins de nos clients en répondant à toutes les exigences de l'industrie automobile.