Protection Foam on unpainted bumper & door trim

  • Carrier: Grey PE foam
  • Adhesive: Removable solvent based acrylic
  • Protective liner: Brown anti-adherent paper
En savoir plus
→ Dimensions
  • Various lengths and widths adapted according to needs
→ Usages
  • Protection during the delivery phases of the car
  • Preventing doors, hoods or trunk to slam during the production
  • Avoiding contacts between different components during transportation phases in the workplace
→ Bénéfices
  • Good resistance to compression
  • Intermediary cuts to fit the curves of the car body
  • Good adhesiveness on unpainted surfaces
  • Easily removable (no residue)
  • Repositionable
  • Good resistance to water (rain, washing ...)
  • Good temperature resistance: -20°C to 85°C
  • OEM approval
→ Stockage et durée de conservation
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00175-01
Creation date : 2021/09/16

Découvrez d'autres produits de la gamme

P777

Double sided adhesive for temporary paint protection

  • Carrier: Transparent PET film
  • Open side adhesive: Permanent solvent based acrylic
  • Closed side adhesive (on the liner): Removable solvent based acrylic
  • Liner: White anti-adhesive paper
  • Temporary adhesion on painted metal, painted and varnished plastic and chrome elements
  • Vehicle exterior application
  • No marks or traces when removed after 6 months
Fiche technique →

P778

Double sided adhesive for temporary plastic part protection

  • Carrier: Transparent PET film
  • Open side adhesive: Permanent solvent based rubber
  • Closed side adhesive (on the liner): Removable solvent based acrylic
  • Liner: Brown anti-adhesive paper
  • Temporary adhesion on unfinished plastic smooth or textured
  • Vehicle exterior application
  • No marks or traces when removed after 6 months
Fiche technique →

Protection Foam on painted bumper & painted steel

  • Carrier: White PE foam
  • Adhesive: Removable solvent based acrylic
  • Liner: White anti-adherent paper
  • Protective foam applied to carbody, painted bumpers, chromed trim
  • Temporary adhesion on varnish and chrome
  • No marks or traces when removed after 6 months
Fiche technique →

Ce produit convient-il à votre application ? Prenez contact avec votre correspondant Adhex dès maintenant

Grâce à notre expérience et à nos compétences en matière de développement, nous élaborons des solutions adaptées aux besoins de nos clients en répondant à toutes les exigences de l'industrie automobile.
Contactez-nous →