P1227
Single coated white PET-Cellulose Non-Woven
- Carrier: White PET-Cellulose Non-Woven 34 g/sqm
- Adhesive: Water-based acrylic 25 g/sqm
- Liner: White paper, two sides siliconized paper 122 g/sqm
En savoir plus
→
Dimensions
- Roll width upon request
- Maximum width available 1000mm
→
Uses
- Tapes for medical device securement: gaze or catheter holding during dialysis sessions
→
Benefits
- Conformable
- Microporous aspect
- Can be used as self wound tape without liner (upon request)
- Tearable by hand
- Breathable
→
Storage and shelf life
- Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
- Product as supplied in original packaging will maintain stated properties during two years before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
Check out other similar products
XL Care Dermic Tape
Needle securement - Catheter and gauze fixation
- Carrier: White PET-Cellulose Non-Woven 34 g/sqm
- Adhesive: Water-based acrylic 25 g/sqm
- Liner: White paper, two sides siliconized paper 122 g/sqm
- Skin friendly adhesive to reduce pain at removal
- Microporous white stiff non-woven to ensure air and water vapor permeability
- Individually pre-cut presentation to be applied easily
P570LL
Single coated white PET non-woven
- Carrier: White PET non-woven 45 g/sqm
- Adhesive: Solvent acrylic 35 g/sqm
- Liner: White paper one side siliconized 81 g/sqm
- Higher skin adhesion
- Breathable
- Soft touch and conformable backing
P1003-1
Single coated white PET non-woven
- Carrier: White PET non-woven 59 g/sqm
- Adhesive: Solvent acrylic 60 g/sqm
- Liner : White paper one side siliconized 62 g/sqm
- High cutaneous tolerance
- Rigid non-woven carrier
- Easy to die-cut thanks to liner thickness