P1287

(Temporary) Single coated transparent PU film

  • Applicator: Transparent PE film 50 g/sqm
  • Carrier: Transparent PU film 25 g/sqm
  • Adhesive: Water-based acrylic adhesive 25 g/sqm
  • Liner: White paper one side siliconized 80 g/sqm
En savoir plus
→ Dimensions
  • Roll width upon request
  • Maximum width available 1500mm
→ Uses
  • Adhesive tape for plasters and superficial wound protection
  • Breathable incision films
→ Benefits
  • Good adhesion
  • Highly conformable
  • Highly breathable
  • Waterproof
  • Bacteria proof
→ Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during one year before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably inbetween 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity
  • Adhesion values and related specifications are set based on initial lab and production trials. They should be regarded as provisional and might typically be adjusted after 5 first production runs will be given the physical / chemical characteristics and behavior of pressure sensitive adhesives, variation of physical values from one batch to another, or even within the same batch, are not unusual and cannot be regarded as a defect. Where necessary, based on values observed in the 5 first batches, Adhex Lab will propose an adjustment of the specifications, including mean value, min/max limits and/or broadness of range
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00089-03
Creation date : 2021/09/30

Check out other similar products

P1097

Single coated transparent PU film

  • Carrier: Transparent PU film 28 g/sqm
  • Adhesive: Solvent free acrylic 33 g/sqm
  • Liner: White paper one side siliconized 62 g/sqm
  • Highly conformable
  • Breathable
  • Eco-friendly adhesive
Technical sheet →

P1171

Single coated transparent PU film

  • Carrier: Transparent PU film 28 g/sqm
  • Adhesive: Solvent acrylic 40 g/sqm
  • Liner: White paper one side siliconized 62 g/sqm
  • Higher adhesion on skin and drape
  • Breathable and conformable
Technical sheet →

P1177

Single coated transparent PU film

  • Carrier: Transparent PU film 28 g/sqm
  • Adhesive: Solvent free acrylic 30 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
  • Very conformable and breathable
  • Waterproof and bacteria proof
  • Eco-friendly adhesive
Technical sheet →

Do you think P1287-1 could fit with your application ? Get in touch with your Adhex correspondent now.

Contact us →