P570LL

Single coated white PET non-woven

  • Carrier: White PET non-woven 45 g/sqm
  • Adhesive: Solvent acrylic 35 g/sqm
  • Liner: White paper one side siliconized 81 g/sqm
En savoir plus
→ Dimensions
  • Roll width upon request
  • Maximum width 1220mm
→ Uses
  • Adhesive tape for standard ECG electrodes
  • Adhesive tape for plasters manufacturing
→ Benefits
  • Good skin adhesion
  • High cutaneous tolerance
  • Very conformable and stretchable
  • Soft touch due to Spunlace non-woven
  • Easy die-cut due to liner thickness
→ Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during two years before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00023-02
Creation date : 2021/09/30

Check out other similar products

P904

Single coated white PET non-woven

  • Carrier: White non woven PET 40 g/sqm
  • Adhesive: Solvent free acrylic 50 g/sqm
  • Liner: White paper, one side siliconized 80 g/sqm
  • Good skin adhesion
  • Microporous aspect
  • Stretchable in cross direction
  • Eco-friendly adhesive
Technical sheet →

P926

Single coated white PET non-woven

  • Carrier: White PET non-woven 50 g/sqm
  • Adhesive: Solvent acrylic 27 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
  • High cutaneous tolerance
  • Highly conformable
  • Breathable
Technical sheet →

P1035

Single coated skin color PP non-woven

  • Carrier: Beige color PP non-woven 40 g/sqm
  • Adhesive: Solvent acrylic 50 g/sqm
  • Liner: White paper, one side siliconized 65 g/sqm
  • Good adhesion
  • High cutaneous tolerance
  • Beige hydrophobic carrier
  • Easy to die-cut
Technical sheet →

Do you think P570LL could fit with your application ? Get in touch with your Adhex correspondent now.

Contact us →